Generally speaking, the brush consists of three parts: brush rod, metal nozzle,


Brush head brush rod: general materials are acrylic, plastic, wooden rod, bamboo rod, metal rod, resin acrylic, plastic, collectively known as the casting handle, need to customize the mold


The most common are bamboo and wooden poles. Ctenophile is the most widely used wooden pole. In addition, there are high grade sandalwood



Sandalwood is most expensive needless to say, log is expensive, add processing later period is made, can be more expensive only.The rest are more common, the relative cost of acrylic is more expensive, the need to open the mold, general acrylic are large to mass production of a style or series will choose it, so have the ability to acrylic brush bar brush factory, generally is a little foundation, not small retail

The most common comb pole as an example, a brief introduction to the production of brush rod according to the design of the shape of the brush rod, the shape of the rod is painted, generally need to primer 2 times plus 6 to 8 times of finish paint, saturation, hardness will be better.Leave the brush in a cool, dry room for about a month to allow the smell to dissipate.So, if you buy the brush hardness is not easy to scratch or paint saturation is not enough is usually jerry-built, paint the following 6 times.The taste of the brush paint that buys is bigger usually it is ventilated not enough, oneself are placed naturally in the cool place that avoids light in the house half month is no problem metal tube mouth is divided into copper tube and aluminum tube two kinds of material commonly, copper tube is slightly thick, hardness is aluminum tube 10 times as high, 5 times as good as aluminum, good handle,